What is the Proper Way to Put On a Lex Loop / Xercuff®?
What is the Proper Way to Put On a Lex Loop / Xercuff®?
The proper way to put on either the Lex Loop or the Xercuff® is to step into the middle of the tubing ring with both feet then secure the cuffs to ankles. The rubber tubing should always be on the outside of your ankles.
Yes, SPRI’s tubing can be used in pools, however it must be rinsed thoroughly in non-chlorinated water and hung to thoroughly dry after each use. In addition, it is recommended that the Xertube® with Sleeve or Braided Xertube® is used in pools with a rough surface bottom.
The length of each type of Xertube® depends on the desired extensibility of that product: Original Xertubes® range from 44” – 54” depending on the resistance level
Braided Xertubes® are all 55” long
Braided Xertube® Plus’ are all 70” long
The lifespan of SPRI’s stability balls depends upon the amount of use and proper care. All SPRI products are warrantied for 90 days. SPRI recommends inspecting all stability ball products on a regular basis and replacing every 1-2 years to ensure the best possible performance.
The lifespan of SPRI’s tubing products depends upon the amount of use and proper care. All of SPRI’s products are warrantied for 90 days. SPRI recommends inspecting all tubing products on a regular basis and replacing annually to ensure the best possible performance.